Corner Shed
The clever design of this 5 sided shed allows it to fit neatly into the corner of your garden. Think of it as a square shed that has a corner cut off at the door position. This forms a 45 degree angle either side of the doors with the other 3 corners all remaining at 90 degrees so it fit snuggly into the corner of your garden.
Specifications
-
FREE delivery
-
FREE installation
-
Felt roll as standard
-
12mm Tongue and groove roof & floor boards
-
12mm Shiplap cladding (15mm nominal)
-
610mm x 457mm windows with horticultural glass
-
1880mm x 914mm single door - ledged & braced
-
Zinc door hinges
-
Rim lock & door knob
-
32mm x 44mm Framing (38x50mm nominal)
-
1937mm eaves height
-
2153mm ridge height
Corner shed sizes available
The size of the shed is determined by the dimensions of the 2 (longest) rear walls. Due to the design, these walls are always equal sizes. The possible sizes are 6ft x 6ft (1.83m x 1.83m), 7ft x 7ft (2.13m x 2.13m) and 8ft x 8ft (2.44m x 2.44m). They all have ample inner capacity for storing your gardening items whilst not jutting out too far into your garden. It has a 3ft wide ledged and braced door with a rim lock and door knob to ensure security and easy access. It also has joinery opening windows as standard in order to give it a great look and practicality.
Corner sheds have pent roofs
Corner sheds are practical and economical garden storage buildings. The roofs are not fancy (like a hipped roof for example) but simple and cheap to make (and install). We do have other summerhouse and log cabin designs that have hipped and gabled roofs. Therefore they have a single sloping pent roof design. This helps to tuck them away, not only from you but also your neighbours. The shed is the same height as a standard 6ft fence panel sitting on a standard 6" gravel board. Therefore next door probably won't even be aware that it is there!
